(Here is the list of all web pages from this
server, arranged by language (in 8 languages).
Choose the page that interests you by
dragging scroll bars, then click on this
page to run it:)
(The same list can be displayed from
"Menu 1" by clicking over there on
"Menu 2".)
Here is the list of all my web pages from all servers.
These are arranged primarily by language
(i.e. as web pages in Polish,
English, German,
French, Spanish,
Italian, Greek, and
Russian.) For each language web pages are
arranged by their subjects.
Choose the page that interests you by dragging scroll bars, then click on this
page to run it:
(The same list can be displayed from
"Menu 1" by clicking over there on
"Menu 4".)
Welcome to this web page on extraordinary "free energy
devices". These devices generate technically useful energy
without consuming any fuel or any other form of energy.
So they can turn extremely important to our energy-starved
civilisation. The operation of this devices is exploiting a
phenomenon of physics which represents an exact reversal
of friction. Similarly like friction spontaneously converts motion
into heat, this phenomenon spontaneously converts heat
into motion. So it is able to propel these "free energy devices",
while it simultaneously cools down the environment. Therefore,
the energy which sustains the operation of these "free energy
devices" is actually the heat extracted by them from the environment.
They convert this heat into electricity, mechanical motion, or
any other form of energy that our technology may need. In
spite that such devices sounds extremely unusual, actually
several working prototypes was already build by devoted
hobbyists and was proven in operation. A primitive version
of one of these devices, i.e. the "telekinetic cell", was even
manufactured, after being embedded into components of
so-called "crystal radio" - which was the only appliance on Earth
that worked perfectly without any energy supply. Descriptions
of these working prototypes are to follow. Now is the right time
to investigate these devices scientifically in order to prepare
them to mass production. Our civilisation desperately needs them.
#1.
What is this "free energy":
The name "free energy" already established itself
on our planet for an entire class of working devices, the operation of which is
based on the physical phenomenon that represents a reversal of friction.
Sometimes this name is also used for describing general principles on which
these devices generate energy (means they generate energy literally "for free").
Due to the employment of the reversal of friction, devices
that generate free energy actually cause the spontaneous conversion of thermal
energy contained in the environment into motion of selected objects (e.g. into
motion of electrons in a wire). The main goal adopted by developers of these
devices, is to work out such an operation of free energy generators, that they
generate energy without actual consuming any fuel, or any other form of energy
supplied to them by users. So these devices generate energy literally at zero
cost - means for free.
The misunderstanding of operation
of these devices by current orthodox science, induced a kind of condemnation
atmosphere that prevails amongst present scientists. This atmosphere claims
that free energy devices supposedly are not going to work, and that their
operation supposedly breaks the Energy Conservation Principle plus few other
laws of thermodynamics. However, as it turns out, these devices are already
working - an example of one that works perfectly is shown on the first
photograph "Fig. #1" from the next column (i.e. on Figure K4 from monograph
[1/4]).
Also, they do not break any law of thermodynamics at all, because their
operation utilises the phenomenon which represents a reversal of friction.
#1.1.
The reversal of friction:
In 1924 the great French physicist,
Louis DeBroglie, published his important discovery, which is sometimes
called the "principle of the symmetry of nature". According to this
principle, in our universe everything is strikingly symmetrical in many
ways. DeBroglie's symmetry principle provided philosophical and scientific
foundations, which allow us to understand a number of natural phenomena,
thus opening them for explorations, discoveries, formulation of new
theories, completion of new devices, etc. For example: the Periodic
Table of the Elements (also called the Mendeléev Table), the existence
of a mirror duplicate for each elementary particle (e.g. electrons
and positrons, protons and antiprotons), and the similarities between
atoms and solar systems - all these document the symmetry existing in
the structure of matter. The similarities between equations that describe
different physical phenomena (e.g. Navier-Stock's equation describing
flow of fluids and Laplace's equation describing heat transfer) express
symmetry in the laws of nature. In turn the technological correspondence
between e.g. pumps and hydraulic motors, or electricity generators and
electric motors, reflect the symmetry in the operation of technical devices.
One of the vital implications of
the DeBroglie's symmetry, which has a direct bearing on the creation
of free energy devices, is the postulate that "every phenomenon must
have a corresponding counter-phenomenon". So far a large number of
phenomena and corresponding counter-phenomena has already been
discovered, which confirm the correctness of this postulate. For example,
the existence of electrical luminescence utilized in fluorescent bulbs
and in various light-emitting diodes to transform electricity into light,
has a counter-phenomenon in the form of the photoelectric effect that
in photocells and solar panels transforms light into electricity. The
so-called "left-hand rule", also called the "motor effect", which
describes phenomena used for the transformation of electricity into
motion, has its counter-rule in the form of "Fleming's right-hand rule",
also called the "generator effect", which works in reverse,
i.e. it transforms motion into electricity. The Seebeck Effect,
which produces a flow of electrons through a junction of two dissimilar
conductors being heated, has its counter-phenomenon in the form
of the Peltier Effect, which causes the heating and cooling of materials
in a similar junction when a current is flowed through it.
The piezoelectric effect, which converts the deformation of
a crystal into electricity, and which is utilised e.g. in piezoelectric
lighters to produce an igniting spark, has its counter-partner in
a phenomenon which also is called "piezoelectric effect", although
it works in a reversed manner - i.e. it converts the electric impulse
into a deformation of a crystal (this counter-phenomenon is utilised
for example in piezoelectric vibration generators).
However, contemporary orthodox physicists claim
that there is an exception to this postulate. They
indicate friction to be this exception. According to
all to-date claims of orthodox scientists, friction is
considered to be the irreversible phenomenon,
which has no counter-phenomenon. But in 1985,
due to the formulation of a new scientific theory
which I named the
Concept of Dipolar Gravity,
I was granted the privilege of discovering the
phenomenon which represents an exact reversal
of friction. Because in the natural form this
phenomenon is manifested during telekinetic
(or psychokinetic) motion, I named it the "Telekinetic Effect".
In the same way as friction spontaneously
converts motion into heat, the Telekinetic Effect spontaneously
converts heat into motion. Not long after the Telekinetic
Effect was discovered, I also managed to found technical ways of
releasing it (through an acceleration or deceleration of magnetic
field force lines).
The discovery, that the Telekinetic
Effect represents a reversal of friction, and a subsequent discovery
of the technological ways of activating this effect, provide the
theoretical foundation for building various free energy devices.
The reason for this is, that according to the mechanism of the
effect discussed here, all what is required in order to generate
such free electricity, is to subject a section of an electric wire
to the action of such an effect. In the result, all free electrons
that are contained in such a wire, are going to be put into the
telekinetic motion from one end of the wire to the other end. In turn such a
mass relocation of electrons in a wire, is nothing else but a flow
of electric current. The thermal energy that sustains this flow
originates from the environment, from which it is spontaneously extracted by the
mechanism of the reversal of friction. The Telekinetic Effect is
spontaneously extracting this energy from the environment just on
its own. So this energy does not need to be supplied to the device
which generates the free electricity (i.e. hence the expression "free energy").
#1.2.
Evidence for the reversal of friction:
Since free energy devices utilise the reversal
of friction which so-far remained unknown to orthodox scientists, the reader
may wonder whether we have any evidence that this phenomenon does exist at all. As
it turns out, we have plenty of such evidence. Actually entire subsection H1.2
from volume 4 of monograph [1/4]
is devoted to description of this evidence.
The most widely known type of it are folklore observations that supernatural
kinetic phenomena always cause rapid temperature drops in rooms in which they
are observed. These temperature drops are in fact outcomes of the conversion of
thermal energy contained in the air from these rooms into some form of supernatural
motion. (Notice that the old expression "supernatural", in modern terminology
from this web site actually means "utilising principles of telekinesis".)
Other evidence stems from the observation of operational free energy devices that
already exist and work. All these devices always decrease the environmental temperature
while generating free energy. But the most objective proof for the existence
of the reversal of friction is the so-called "extraction glow" shown on the
last photograph from this web page. This glow is actually emitted because
atoms rapidly loose their thermal energy - for the detailed description of
this extraction glow see subsection H6.1.2 from volume 4 of monograph
[1/4].
#1.3.
Perpetum mobile = historic sightings of free energy devices:
Although the construction of operational
free energy devices is only possible after people mastered technical
release of the reversal of friction, someone kept showing such devices
to selected people since ancient times. These historic witnesses of such
devices used to call them "perpetum mobile", or "perpetual motion"
machines. Unfortunately, the operation of these devices cannot be
based on the phenomena of our physical world. (They utilise phenomena of
the counter-world.) Thus orthodox scientists coined an erroneous myth,
stating that supposedly it is impossible to build them at all. But the
life (and inventions described here) proved this myth to be wrong.
(Note that you can see the enlargement
of each photograph from this web site, simply by clicking on this photograph.
Most of the Internet browsers that you may use, including the popular "Internet Explorer",
allow also to download
each illustration to your own computer, and then look at it, reduce or enlarge
the size of it, or print it, with your own graphical software.)
* * *
Fig. #1: "Thesta-Distatica", means a two-disk
"telekinetic influenzmaschine". It is the most
advanced free energy device which was build
on Earth so-far, and which actually works
producing abundance of free energy. A
relatively full description of this device is
presented in item #3 of this web page.
Please notice that Methernitha has also
two smaller such devices working on the
same principle, which use a single disk
and which are called "Testatica".
(The above photograph originates from monograph
[1/4]
where it is shown on Figure K4.)
* * *
The free energy device from "Fig. #1" above (i.e. Figure K4 from [1/4])
is called Thesta-Distatica.
It belongs to general category of so-called "telekinetic influenzmaschines".
The word "influenzmaschines" originates from the German language.
It designates a whole class of machines, which utilise the phenomenon
of electrostatic induction in their operation. This phenomenon is
called "influenz" in German. (One needs to distinguish between the
phenomenon of "influenz", and other phenomena that also can be
utilised in various electrostatic machines. For example the
Van de Graaff Generator utilises the phenomenon of "friction".)
Historic examples of influenzmaschines include the Töpler
machine with a single disk, or the Wimshurst electrostatic
machine with two disks. In turn "telekinetic influenzmaschines" are
more advanced versions of influenzmaschines, which for their operation
utilize additionally the phenomenon called the Telekinetic Effect.
(Means they utilize telekinesis in addition to effects of electrostatic influence.)
Principles of operation
and design of telekinetic influenzmaschines are
described in details in subsection K2.3 from volume 10 of
monograph [1/4].
These principles are also briefly summarised
here, in the further part of this web page. The telekinetic
influenzmaschine "Thesta Distatica" shown above was build by
the Swiss Religious Community calling itself the Methernitha.
The Thesta-Distatica generates around 3 kW AC 50 Hz electrical
energy at around 600 Volt. From the operational point of view,
it is actually an AC motor operating on principles of electrostatic
influence. This motor runs because free electrical energy
is supplied into it by a "telekinetic cell" that is embedded
into its design (the design and operation of such a telekinetic
cell is summarised in item #2 of this web page, while
discussed in more details on a separate web page about
telekinetic cells).
The first two such telekinetic influenzmaschines called "Testatica" (with
single disks, based on principles of the Töpler machine) were
build not to produce free electricity, but to produce free
mechanical motion. The goal of their construction was to
illustrate visually to highly sceptical people and to orthodox
scientists, that because these machines can produce physical motion
without any form of energy supply, they actually prove that
the building of perpetual motion machines (also called
"perpetum mobile") is really possible.
Before I proceed with an explanation
how this Telekinetic Effect (means the "reversal of friction")
works and is utilised for the generation of free electricity,
I firstly need to introduce briefly a new scientific theory,
which explains principles of telekinesis and telekinetic motion.
(It also explains numerous other previously "mysterious" phenomena,
e.g. telepathy, the operation of time, energy, magnetic field,
and many more.) This new theory is called the Concept of Dipolar
Gravity. The Concept of Dipolar Gravity is an extremely
interesting scientific theory, which I would highly recommend
for reading. It turns out to be this special
Theory of Everything
searched by people for so long. For example, it explains
telekinesis and mechanism involved in telekinetic motion.
It explains the phenomenon of telepathy. (Telepathy is
discussed on a separate web site, namely on
telepathy.50megs.com.)
The Concept of Dipolar Gravity explains also what is this
"second world" called the "counter-world", to which we are shifting after our death.
It reveals where this second world is located. It explains
the nature of this counter-world. After all, it is this second
world where every telekinetic motion is initialised and carried out.
It discloses how our soul and spirit work and look like.
It allows to deduce what we feel at the moment of death
and during this shifting to another world. It explains
what is nirvana, how our feelings work, what is memory
and how memory works, and many more. (Actually all these
topics which stem from the Concept of Dipolar Gravity are
briefly addressed on appropriate web pages listed in the
"Menu 4",
which I recommend to visit.)
Newest descriptions
of the Concept of Dipolar Gravity
are provided in volumes 4 and 5 of the monograph [1/4]
"Advanced Magnetic Devices". Slightly older descriptions
of the same concept are provided in volumes 6 and 7 of
monograph [8] "Totalizm". Both these publications, means
[1/4]
and [8], are available free of charge via this web
site. Because it does not take a lot of time to review
these two volumes, while they open our eyes on many
phenomena which previously remained unexplained,
including principles of operation of free energy devices,
I am inviting you to have a look at them.
Those readers who have no time to read detailed monograph
[1/4],
may also find in Internet a summary of the description
of the Concept of Dipolar Gravity. For example, this
concept is quite well presented on the web page
jan-pajak.com.)
#1.5.
Technical release of the Telekinetic Effect:
The Concept of Dipolar Gravity explains
comprehensively the Telekinetic Effect.
One of vital details that it tells us, is the principle
utilised for triggering this effect technically. As
it turns out, in order to release the Telekinetic
Effect technically,
it is enough to accelerate or to decelerate magnetic
field force lines. All movable objects, that are wrapped
into such accelerated or decelerated force lines,
are experiencing action of the Telekinetic Effect.
Means that the phenomenon representing the "reversal
of friction" is actually starting to act upon them.
In turn this reversal of friction causes the spontaneous
absorption of thermal energy from the environment, and
conversion of this thermal energy into motion
of objects subjected to the Telekinetic Effect.
So if such accelerated magnetic field wraps for
example electrons inside of a wire of conductor, the result
is that these electrons start to rapidly move at the expense
of thermal energy from their environment. In turn such a
rapid motion of large quantities of electrons forms electric
current. Thus the technical release of the Telekinetic Effect
allows for a relatively easy generation of free electricity.
#1.6.
Principles required to generate free energy:
Since the Concept of Dipolar
Gravity explained to us how to release the Telekinetic Effect
technically, this also tells us what general principle must
be used to generate free electricity. So, as it turns out,
every device for generation of free electricity must have
build into it some manner of accelerating or decelerating
force lines of magnetic field which are wrapping electrons
contained in conductive wires. In turn these accelerated
or decelerated force lines trigger the release of the Telekinetic
Effect that acts upon these electrons. The result is that the
Telekinetic Effect, acting as the reversal of friction,
spontaneously extracts thermal energy from the environment
that surrounds given wires, and transforms this thermal
energy into motion of electrons inside of the wire. This
motion in turn manifests itself as a flow of free electricity.
Such free electricity can be then used for supplying any electric
appliances, in a similar manner as electricity generated by
our current energy generators is. The only side effect of
such electricity generated by free energy devices is, that
it pulsates in a manner which tends to release a residual
Telekinetic Effect. Therefore near such free energy devices
various supernatural phenomena are going to take place,
which are not present around devices supplied with electricity
generated in a conventional manner.
In 1989 I had the honour of inventing a free
energy device, which I called then the
"telekinetic cell"
or the "telekinetic battery". This my theoretical
invention stemmed from the research on the
Telekinetic Effect that I completed earlier.
I described my invention quite well in numerous
publications, including monographs
[6] and
[1/4]
available through this web site. Thus readers
are able to get a good understanding of the
operation of this device, simply by reading
my publications. As I later discovered with
an enormous shock, just such telekinetic
batteries that I invented earlier and described
in my publications, are already embedded
as main components in practically all
operational free energy devices in existence
on Earth. I could recognise them easily,
because I actually invented them. So I am
able to identify which parts of a given free
energy devices are components of the
telekinetic cell supplying a given device
with free electricity, in spite that these
components of the telekinetic cell are
embedded into the design of a given
device, and thus they normally are
undistinguishable from the device itself.
Telekinetic batteries of my invention are very
simple devices, which generate free electricity
without containing any moving parts. They can
operate both, as stand alone generators of free
electricity, or they may become components
of other devices, supplying them with free
electrical energy required for their operation.
For example, the energy required for running
the "Thesta-Distatica" shown above in the first
"Fig. #1" (see K4 from [1/4]) of this web page,
actually originates from a telekinetic cell. Also
the "telepathic pyramid" shown on "Fig. #2a"
to the right (see Figure N1 from [1/4]) is supplied
into electricity just by such a telekinetic cell.
Therefore, in order to understand the operation
of all free energy devices, we need to start from
learning the operation of telekinetic cells of my
invention.
Notice that there is also a separate web page
which is entirely devoted to the presentation of
the design and operation of the telekinetic cell
of my invention. This web page can be run from
"Menu 1" and "Menu 2" via the name
telekinetic cell.
#2.1.
Components of a telekinetic cell:
A simple telekinetic cell is shown on
"Fig. #2a" (i.e. on the upper part of Figure
N1 from monograph
[1/4]) -
see it to the right from here. The interior
and components of this telekinetic cell are
illustrated in "Fig. #2b" (i.e. on the lower
part of that Figure N1 from [1/4]). In turn
their electrical connections are illustrated
on the electrical diagram from "Fig. #2d"
(i.e. Figure N3 from [1/4]). Here is the list
of main components of this cell:
1. Telekinetic inductors (I1) and (I2).
The most important component of every telekinetic
cell are two inductors marked (I1) and (I2) on all
my diagrams - including into this all diagrams
from this web page, as well as diagrams from
a separate web page on the
telekinetic cell
of my own invention. These inductors are
components in which the telekinetic generation
of free electricity is carried out. Both these
inductors are composed of permanent magnets,
onto which coils of conductors are wound up.
In order to provide the generation of free electricity
in both halves of sinusoidal cycles, two such inductors
are needed, on which coils are wound in two opposite
directions when related to the magnetic polarity
of their permanent magnets.
The principle of electricity
generation in these inductors is quite simple. Namely the magnetic
field of permanent magnets on which these inductors are wound,
changes the shape of (normally) sinusoidal curves of the electrical
impulses which flow through these inductors. The result is, that
instead of normally sinusoidal wave shape, this electricity starts
to follow a shape that accelerates and decelerates electrons.
In turn these accelerations and decelerations of electrons cause
the release of the Telekinetic Effect (means the "reversal of
friction") that acts on these electrons. The Telekinetic
Effect spontaneously converts heat contained in the environment
into a more powerful motion of electrons in wires. As the outcome,
such inductors add small portions of energy to each electrical
impulse that flows through them. Simultaneously they absorb heat
from their environment. (Means, while adding energy to the impulses
that flow through them, they simultaneously cool their environment
down.) So the Principle of Energy Conservation is fulfilled,
while the free electrical energy is generated.
2. Pulser (Q). The inductors
described above do not generate their own electricity. They only
telekinetically add the required power to weak electrical impulses
which already flows through them, but which originate from other sources.
Therefore, in order these inductors could work, they need to
be supplied with a constant stream of electric impulses. For
this reason, a second vital component of every telekinetic cell,
is the so-called pulser "Q". Such a pulser is simply any device
that supplies inductors I1 and I2 with an uniform stream of
electric impulses.
In the telekinetic inflenzmaschines shown above
in "Fig. #1" (i.e. K4 from [1/4]) and described in
item #3 from the further part of this web page, a
pulser (Q) is simply a special electrode marked
"ho", which hangs just above a spinning disk and
in front of a permanent magnet, and thus which
gathers uniform electrical impulses from this spinning
disk. In turn in the "telekinetic cell" shown to the right
in "Fig. #2a" (i.e. in Figure N1 from [1/4]), this pulser
is simply a quartz crystal (Q) that is made to vibrate
uniformly by telepathic waves concentrated on it by
the resonance cavity of a pyramid.
3. Resonator (R).
Inductors of a telekinetic cell work by increasing
slightly the amount of electric power that is contained
in each single pulse of electricity which flows through
them. But these small amounts of power need later
to be added together in order to build up the energy
output from such a cell. This dynamic adding together
small increases of power is carried out by the component
called the "resonator" and marked (R) on "Fig. #2d"
(i.e. on Figure N3 from [1/4]). The resonator is simply
an oscillatory circuit. It works in a cell similarly like a
swing with a child, which to the energy already attached
to the body of this child adds each single portion of
energy that a parent contributes through repetitive
pushing this child in the process of swinging.
4. Reciprocator (T).
A next important component of every telekinetic
cell, is a "reciprocator" (marked "T" on all diagrams
from this web page and from monograph [1/4]).
(In old times reciprocators were called "coherers".)
If such a reciprocator is designed as a "tube"
then it contains a mixture of ordinary kitchen salt
with mercury, kept under vacuum.
The function of this "reciprocator" is quite a complex
one. The detailed description of this function is
provided in subsections K2.3 and N2.3.3 from
monograph
[1/4].
The most vital aspect of this function is also
explained on a separate web page about the
telekinetic cell,
where in order to describe it, an illustrative example
of starting a stationary steam locomotive is used.
But if we would like to summarise this function briefly,
it is a bit similar to the function of a phase shift in
position of both pistons from old steam locomotives,
or a phase shift in pistons of modern car engines.
(Unfortunately, no many people know that steam
locomotives, in order to be able to start moving
together with heavy wagons attached to them,
must have at least two pistons, which work with
appropriate mutual phase shifts of 90 degrees
in their cycles of strokes.) Namely, this
reciprocator prevents electrical deadlocks from
occurring between oscillations of subsequent components
of a given telekinetic cell. (As the reader probably knows,
every oscillatory system has two points in its motion, which
are called the "deadlock" points. For example, in engines these
two points are when pistons stop motion in one direction
and begin the motion in an opposite direction. When we have
a situation, like in a telekinetic cell, that several
separate oscillatory systems must cooperate with each other,
these deadlock points hinder the cooperation - if they are not
aligned with appropriate phase shift. In telekinetic cells
this phase shift is produced by the "reciprocator".) Actually,
without such a reciprocator, the telekinetic cell would not be able
to start nor to work properly. Because the operation of reciprocators
"T" is quite complex, I would advice to read about them
from subsections N2.3.3 and K2.3 of monograph
[1/4],
where they are described quite comprehensively
and with all required details. A slightly more extensive
than here description of reciprocators is also provided
on the web page on
telekinetic cell
of my invention.
When one sees this reciprocator "T" in action on any free energy
device already build on Earth, it can be easily recognised because
it glows strongly. Namely the free energy which flows through it
causes that it emits a powerful light. The first photo on this
web page - see "Fig. #1" above (or Figure K4 from [1/4])
actually shows it glowing. In turn the "telekinetic battery"
from "Fig. #2b" (or Figure N1 (low) from [1/4]) shows it
in a non-glowing state (see the blue tube "T" visible by
the basis of the telepathic pyramid).
#2.1.1.
Notice that the same components of the "telepathic pyramid" simultaneously work as a telepathic transmitter and receiver (telepathyser):
The device called "telepathic pyramid" which
is described here in the function of a
telekinetic cell,
actually performs two different functions.
The cell is only the first one out of these two -
after all, in order this device could work it
must be somehow supplied with electricity.
The second function of the same "telepathic
pyramid" is the work as a telepathic transmitter
and receiver, means as a so-called telepathyser.
This second function, as well as the extraordinary
history of this pyramid, are described on a separate
web page about
telepathy.
#2.2.
Designs of reciprocators which are already proven in operation:
Reciprocators are essential components
of telekinetic cells, without which these cells
refuse to work. They are also components,
the necessity and the key role of which is
not realised by most of present builders
of free energy devices. Fortunately for us,
as this is explained in details in item #4.4
of separate web page about
telekinetic cells,
there are numerous designs of reciprocators
already verified in operation. The most simple out
of such designs of reciprocators, is a cluster of
galena crystals probed with a "cat's whisker",
which was used in past as a reciprocator for
so-called "crystal radios". (These radios were
supplied into electrical energy by such telekinetic
cells embedded into their electronic circuits.)
More complex reciprocators contained a "tandem
of quartz crystals". These were used in two working
prototypes of telekinetic influenzmaschines
called "Testatica". But the most perfect one was
the reciprocator constructed as a "tube" with
a mixture of salt and mercury kept
under vacuum. It was used in prototypes of
"telepathic pyramids" shown here in "Fig. #2a".
I read also in one book that someone constructed
a working reciprocator (or more strictly a "coherer")
by parallel connection of several transistors.
Unfortunately, no details of this connection
were provided in there. Further data regarding
designs and operation of reciprocators are
provided on the separate web page about
telekinetic cells.
Fig. #2a: The above photograph shows me (i.e.
Dr Jan Pajak)
holding in hands a device called the "telepathic
pyramid". A main component of such a telepathic
pyramid is a telekinetic cell which supplies
it with free electricity required for the operation.
(The above photograph originates from monograph
[1/4]
where it is shown in the upper part of Figure N1.)
The detailed design and operation of this device is explained
in subsection N2 from volume 11 of monograph
[1/4].
In turn the extraordinary history of this device, plus
also details of its operation, are explained in treatise
[7/2].
Both these publications, i.e.
[1/4] and
[7/2]
are downloadable free of charge from this web site.
Fig. #2b: The interior of the telepathic pyramid.
This photograph illustrates major components
of this device. Because each of these components
is simultaneously a component of the telekinetic
cell embedded into the telepathic pyramid in order
to supply it with electricity, this photograph illustrates
also main components of a telekinetic battery.
(The above photograph originates from monograph
[1/4]
where it is shown in the lower part of Figure N1.)
The list of components shown on this photograph,
as well as their operations, are explained in subsection
N2.2 from volume 11 of monograph
[1/4].
They are also briefly summarised in item #2.1 of
this web page. In addition, there is a separate web page on the
telekinetic cell
which describes each of these components in greater
details.
Fig. #2c: The design of the "telepathic pyramid".
The above drawing illustrates also components
of a telekinetic cell that is embedded into this
telepathic transmitting and receiving device.
Names and labels of subsequent components
of this cell indicated on the above drawing are
described below under the illustration "Fig. #2d".
(The above illustration originates from monograph
[1/4]
where it is shown on Figure N2.) Apart from subsection
N2.2 from volume 11 of monograph
[1/4],
the components illustrated above are briefly
explained in item #2.1 from the left column of this
web page, and also on a separate web page about the
telekinetic cell.
Fig. #2d: The electrical diagram and wiring of the
"telepathic pyramid". The subsequent components
of this device, which constitute a telekinetic cell and
which are described on this web page include: (I1)
and (I2) - telekinetic inductors, (Q) - a pulser, (R) -
a resonator which is just a simple oscillatory circuit
(note that two inductors (I1) and (I2) provide the
inductance required for the operation of this resonator,
while the vacuum capacitor formed by components
marked (D1), (D4), (F) and (C) is providing the
capacitance also required for work of this oscillatory
circuit), (T) - the reciprocator.
(The above illustration originates from monograph
[1/4]
where it is shown in Figure N3.)
The description of work of subsequent components
shown on this diagram, as well as explanation of the
work of the entire telekinetic cell contained in this
telepathic pyramid, are provided in subsection N2.4
from volume 11 of monograph
[1/4].
They are also summarised briefly in item #2.2 of this web page,
and on a separate web page about the
telekinetic cell.
#2.3.
Operation of a telekinetic cell:
The operation of telekinetic cells is extremely
simple, although it involves quite complex
phenomena that are described in details in monograph
[1/4].
This operation is illustrated on "Fig.#2d" above
(i.e. N3 from [1/4]). Every
such a cell works because a pulser "Q" sends to it an uniform
stream of electrical impulses. Each of these impulses is
reinforced with additional power by inductors I1 and I2.
Thus the power of each impulse is greater at the exit
from these inductors, than at the entry to them. So all that
is then needed, is to gather (means "add together") these
small increments of power carried by each impulse, and
forward them outside of the cell. This adding together is
carried out by the resonator "R" which also forwards the
energy so collected to the output terminal. Because the cooperation
between the resonator "R" and the pulser "Q" could be
hindered by the so-called "deadlocks" which occur in
all oscillatory systems, there is an additional component
called the reciprocator "T", which eliminates these deadlocks.
It removes the deadlock points, mutually synchronises the
oscillations in the resonator "R" with the oscillations
from the pulser "Q", and allows this device to initiate
its oscillations whenever the cell is switched on.
#2.4.
How to build a telekinetic cell:
Should you have the appropriate
housing conditions and personal inclinations for experimenting, finances for
private research, and inventive skills, I would highly recommend
to start building the telekinetic cell. However, before you begin
this building, I would also recommend to read everything that
describes this device, so that you understand how it operates
and what phenomena occur inside of it. You should at least
read volumes 4, 10, 11, and 1 (i.e. chapters H, K, N, and A) of
monograph [1/4]. Volume 4 explains to you the phenomenon of
telekinesis and the action of the Telekinetic Effect, the
understanding of which is absolutely essential for the success
in constructing this device. Volumes 10 and 11 explain to you
the operation of free energy devices in general, and telekinetic
cells in particular. They also explain to you, step by step,
how to build subsequent components of these devices and what
is vital in these components. In turn volume 1 (especially
subsection A3), explains to you the types of dangers that
are awaiting for developers of these devices, and also disclose
to you the dark force that hides behind these dangers. (In turn
how to overcome these dangers is explained in subsections W6.1
and W6.2 from volume 18 of [1/4], and also on the web page
totalizm.pl).
After you learn how this cell works, you can gather the required
components, put them together, and initiate your experiments.
But hurry up, because this device is urgently needed by our
civilisation. Perhaps it may even save humanity from the
extinction.
#2.5.
Prototypes of
telekinetic cells
were already manufactured on Earth. They were called "crystal radios":
As I explained this exactly in items #5 and
#6.3 of the separate web page about
telekinetic cells,
over half a century ago primitive prototypes
of telekinetic cells were already manufactured
on Earth. They were called "crystal radios" or
"crystal sets". They worked perfectly producing
free electricity - only that in small amounts.
In fact these were the only devices mass
produced on Earth so far, which did not require
any battery nor external energy supply, but
in spite of this still correctly performed their
functions. They did this because they contained
a primitive version of the telekinetic cell
of the design described on this web page,
embedded into their electronic circuitry.
Electronic engineers explain the lack of
need for energy supply to these "crystal radios"
by claiming that these radios extracted
the required energy from their antennas.
However, I never met a description of
experimental research which would report
on someone who actually measured the
energy input from antennas of these radios,
and verified whether this input in fact did
cover the energy consumption that took
place in crystal radios. The point is that
since there was no experimental verification
that such crystal radios really extract their
energy from antennas, in reality they could
operate because their circuitry released
the phenomenon of reversal of friction
that I am describing here – only that
Electronic engineers are unaware of
this extremely vital fact.
It is also meaningful, that apart from these
"crystal radios" no other electronic devices
were ever build on Earth that would be able
to satisfy their energy consumption from antennas.
In fact there is an attribute of crystal radios,
which conclusively proves that these radios
contained a telekinetic cell embedded into
their electronic circuitry. This attribute is their
refusal to operate when earphones are replaced
in them with loud speakers. If these crystal
radios were supplied into electricity from antennas,
then they should operate almost equally well
when the voice is generated in them either by
earphones, or by loud speakers. But if their
energy supply originates from a telekinetic cell
embedded into their circuitry, then they have
the right to work only with earphones, while
when loud speakers replace these earphones
they should refuse to work (and this is exactly
what happens). The reason is that the
telekinetic effect described in item #1.1 of
this web page is generated in a coil wound
over a permanent magnet only if this coil
is permanently fixed to the magnet - as
this takes place in earphones of the old type.
However, if the coil can move in relationship
to the permanent magnet, then the telekinetic
effects is NOT generated, and instead of it
mechanical vibrations are produced - as this
happens in loud speakers. So practically, after
someone replaces earphones with loud speakers,
this eliminates the telekinetic effect from the
circuitry. In turn without the telekinetic effect
the crystal radio is unable to generate electricity
needed for sustaining the operation. So the work
of such a radio must then cease. More on the
same subject in item #5.1 of the web page about
telekinetic cells.
Now it should be enough to just improve
appropriately these old prototypes of crystal
radios in order to receive telekinetic cells
of the full efficiency and power. So let us begin
the work, because without these devices our
civilisation slowly is dying. In item #6 of the
web page about
telekinetic cells
is explained, step by step, how in the most
simple and fastest manner transform a
"crystal radio" in such a way, that the circuitry
of this radio becomes converted into a telekinetic
cell that generates an abundance of free energy.
#3.
Telekinetic influenz-maschines:
Telekinetic influenzmaschines are first
successful "free energy" devices build on our planet, which actually
work and produce abundance of free electricity. They are currently
owned by the Swiss Religious Community calling itself the "Methernitha".
Unfortunately, for reasons which I am trying to explain in my monograph
[1/4],
Methernitha is determined to keep secret the technical details,
as well as the history of these extraordinary devices. In 1991 I flew
from New Zealand to Methernitha especially to see this extraordinary
device. Regrettably, at that time Methernitha already implemented the
iron rule to not show this machine to anyone (it was being shown to
every interested person just a few years earlier). So my only benefit from
that visit was to meet in person Paul Baumann - the technical genius who
actually constructed the Thesta Distatica. Thus the history (and also
the operation) of telekinetic influenzmaschines that I am describing on
this web page and in my publications, originate from my chance findings
and also from my personal research on the technically induced Telekinetic
Effect, not from the Methernitha itself. This means that I believe
that the information that I am providing here is probably correct,
although I have no means to verify the correctness of it. Thus I would
suggest to treat it only as a "gossip", which gives some taste of the
strange fate of the most vital technical development of our civilisation.
#3.1.
History of telekinetic influenz-maschines:
By a strange coincident I
learned that the first developer of telekinetic influenzmaschines was
an Austrian citizen named Bela Brosan. He constructed the first two
such devices, which actually worked successfully. His breakthrough
devices had a single spinning disk, and were based on principles
of the Töpler electrostatic machine. He also published a small booklet
(editorial details referred in my monograph
[1/4]),
in which he described
these devices. Unfortunately, soon after constructing his two small devices,
Bela Brosan died (supposedly in quite suspicious circumstances - probably
secretly assassinated by this "dark force" that is interested in suppressing
the mastery of free energy on Earth). In turn his two working free energy
devices were shipped to Switzerland
by his helper called "Nitschel", who was known around from his "golden hands"
skills, as well as from his radical religious views for which he even run
into problems with local authorities. It was supposedly from this Nitschel,
that the religious community Methernitha got hold of the first two these devices.
Methernitha keeps them in the working order until today, sometimes showing
them to the carefully selected people. They are called "Testatica".
Later, by using the Brosan's working model, Methernitha build another,
the third such device with two rotating disks. It was called the
"Thesta-Distatica". It worked perfectly and proved itself so successful
in operation, that Methernitha initiated the project of building a huge
version of it with two disks over 2 meters in diameters. For my best
knowledge this large free energy project is still being continued even
today. More details regarding the extraordinary history of telekinetic
influenzmaschines is provided in subsection K2.3.1 from volume 10 of
my monograph
[1/4],
downloadable free of charge from this web site.
There is a fact, which hit my eyes when
I visited Methernitha in 1991, and which is conclusively disclosing who is
this "dark force" that makes impossible for our civilisation to master free
energy devices. Namely when I talked to Paul Baumann (the constructor of
"Thesta-Distatica") near the gate to the building of Methernitha in which
research on telekinetic influenzmaschines is carried out, I was shocked by
tens of magnetically scorched rings of grass that were present on a nearby
paddock. In fact this paddock was so covered with scorched rings of grass,
as that one shown in Figure O1(c) in monograph [1/4].
In turn from research on identical rings of scorched vegetation that exist in New Zealand, it is
known that they are formed during UFO landings. This means, that UFOnauts
are extremely interested in fate of telekinetic influenzmaschines. So they
continually spy on people of Methernitha and hypnotically program these people
to never release the technology of free energy machines outside of
Methernitha. Means that UFOnauts are this "dark force", which makes impossible
for humanity to master the production of free energy devices. (For more
information about UFOnauts continually pushing our civilisation down,
see the web page
ufonauts.20m.com,
or see subsection A3 from volume 1 of monograph [1/4].)
#3.2.
Components of telekinetic influenz-maschines:
The basic part of every telekinetic
influenzmaschine is a spinning disk
with 50 electrodes (for the USA it must
have 60 electrodes, as the North America
uses AC electricity of frequency 60 Hz).
This disk is visible on all illustrations of
these devices. In order to make it spin
at constant speed of around 60 RPM
(means at the speed of 1 revolution per
second), the disk is a part of an electrostatic
motor that works on principles which are
the reversal of principles from the Töpler
electrostatic machine, or from the Wimshurst
electrostatic machine. Another vital component
of every telekinetic influenzmaschine is
a telekinetic cell described earlier in item
#2 of this web page. This cell is controlled
with electric impulses generated by the spinning
disk. (I.e. these 50 electrodes of the disk
spinning with the rotational velocity of 1
revolution per second, are the starting components
which generate 50 Hz impulses for the pulser
of the telekinetic cell.)
#3.3.
Operation of telekinetic influenz-maschines:
In the sense of principles involved
in their operation, telekinetic influenzmaschines are actually
duplex devices composed of two mutually cooperating components.
The first of this components is an electrostatic motor, which works
on principles of electrostatic influence. Means this motor uses principles
of operation that are exact reversals of principles utilised in either
the Töpler machine, or in the Wimshurst electrostatic machine. (As you
probably know, in electricity principles of motors and generators
are mutually reversible. This means that principles applied in
every electric motor can be reversed so that they produce a
generator of electricity. Also principles of every electricity
generator can be so reversed that they produce an electric motor.
This reversibility applies to principles utilised in the Töpler
and the Wimshurst machines.)
The second component of telekinetic influenzmaschines is a
telekinetic cell described before in item #2 of this
web page. This cell generates free electricity which is
used for sustaining the motion of the motor. Both together, means the
motor and the telekinetic cell, form a telekinetic influenzmaschine
which not only produces a visible mechanical motion without the need
for any energy supply, but also produces a surplus of free electricity
which later can be supplied to other electrical appliances in order
to power them.
Earlier on this page, while describing telekinetic
cells I also mentioned, that in order to make these
cells work, a series of electrical impulses of the
constant frequency 50 Hz for Europe and 60 Hz
for the USA must be supplied to their entry. In order
to generate these impulses, telekinetic cells include
a special component called the "pulser". These
impulses are later reinforced by the Telekinetic
Effect released in inductors (I1) and (I2).
In telekinetic influenzmaschines these impulses
are generated by the electrostatic motor described
before. To generate them, the motor used in Europe
must have a disk with 50 electrodes (the disk used
in the USA must have 60 electrodes). This disk must
rotate with the constant rotational velocity of 60 rotations
per minute (RPM) - means 1 revolution per second.
The result is, that if in front of this disk we place the
"impulses' collecting head" marked "ho" on Figures
"Fig. #3a" and "Fig. #3b" (or K5 and K6 from [1/4]),
a series of AC impulses of frequency 50 Hz in Europe
(or 60 Hz in the USA) are induced in this head. Thus,
this head "ho", together with electrodes of the spinning
disk, represents a "pulser" for the telekinetic cell. If now
these 50 (or 60) Hz impulses we feed from this collecting
head the telekinetic battery, the battery is going to
telekinetically generate 50 Hz AC electricity for Europe,
or 60 Hz for the USA. A part of this AC electricity must
be redirected back to the electrostatic motor to supply
it into energy and thus to keep it rotating. The rest can
be supplied outside of the device and directly utilised
in our home appliances. And this is how telekinetic
influenzmaschines do work. Of course to construct them,
we must solve several technical problems. One of
these is the maintenance of the constant speed of 60
RPM at the rotating disk. On the accuracy of this constant
speed depends the frequency of free electricity being
generated. To solve this problem, it is necessary to
add special "speed controller" to the design of the
electrostatic motor. This controller is formed through
linking mechanically the electric motor used as the
main part of telekinetic influenzmaschines, with an
additional small spinning spindle which holds a small
controlling dynamo-motor. This dynamo-motor has
the "opposing" electrical connection (i.e. the positive
feedback) with the main motor of the telekinetic
influenzmaschine. In Figure "Fig. #3b" (or K6 from
[1/4]) this controlling dynamo-motor is marked as "Ts".
This dynamo-motor causes, that when the main
motor runs too fast, the "Ts" begins to work as a dynamo,
means starts to generate electricity that counteracts the electricity which
propels the main motor, thus slowing this main motor down. In turn when the
main motor runs too slow, this "Ts" dynamo-motor switches itself onto the
operation as an additional small electric motor, which adds rotational
power to the influenzmaschine, thus causing the disk to rotate much
faster.
Note that the original inventor and developer
of telekinetic influenzmaschines (i.e. Bela Brosan) was to
produce with them the free mechanical motion, not the free electrical
energy. However, later users of these devices had no clue about principles
and phenomena involved in their operation. So they were unable to extract
the telekinetic cell from the entire telekinetic influenzmaschine, to
generate electricity much simpler with this cell alone.
#3.4.
If you are one of developers:
Numerous people attempted to replicate
the telekinetic influenzmaschine called
"Thesta Distatica" - this one shown in Figure
"Fig. #1" above (or K4 from [1/4]). Unfortunately,
so-far all these people failed. In fact,
even the Methernitha - which actually
have already three working models of
telekinetic influenzmaschines, experiences
unbreakable difficulties in replicating them
at a large-scale. The reason is, that all these
people try to mimic the components and
the physical structure of the original "Testatica" or "Thesta-Distatica"
devices, without actually understanding how these devices work
and what principles they employ. So if you are one of these people experimenting
with free energy, please do not repeat the same error. Start your developments
from actual learning and understanding how free energy devices in general,
while telekinetic influenzmaschines in particular, do work. Only then
replicate in your own device their principles of operation, instead of
thoughtless mimicking their physical structure and components. Only
in such a case you may succeed. And we all wait for your success,
because we all desperately need free energy.
Fig. #3a: Major components of telekinetic
influenzmaschines. The list of these components
and their operations are explained in subsection
K2.3.3 from volume 10 of monograph
[1/4].
Some of these components are described on this
web page, when principles of operation of telekinetic
influenzmaschines and telekinetic cells are being
explained.
(The above photograph originates from monograph
[1/4]
where it is shown on Figure K5 "b".)
Fig. #3c: The photo from this Figure presents me (i.e.
Dr Jan Pajak)
holding the brand new Wimshurst electrostatic machine
that I purchased in Poland for around $100 in a shop
then called CEZAS, that supplied schools with teaching
aids.
(The above photograph originates from monograph
[6/2]
where it is shown on Figure 11.) This Wimshurst
electrostatic machine can be converted into an
electrostatic motor, which in turn can be supplemented
with a telekinetic cell (described in item #2 of this web
page) which supplies this motor with electricity, and
together they can be used as the main component
of a telekinetic influenzmaschine. Actually I purchased
the above machine with the intention that I convert
it into a telekinetic influenzmaschine. At the time of
this purchase I still was doing open and non-camouflaged
research on the Telekinetic Effect and on free energy
devices at the Otago University. I also still believed,
that I may build over there one of free energy
devices that I invented and worked out at that time.
By the way, note the most
prominent cluster of buildings right behind me - at the level of
my shoulder blades. These are from the campus of the Otago
University in Dunedin, New Zealand, where I actually invented
telekinetic cells and explained the operation of free energy
devices presented on this web page. This university is the
site of my first (hopelessly lost) battle with orthodox scientists
regarding the inclusion of free energy devices and the Telekinetic
Effect, into the area of interests of the mainstream science.
I intended to build at this university my free energy devices in order
to prove that they actually work. I also intended to present
papers and articles about these wonder devices. Unfortunately,
my superiors from that university disallowed me to present even my
first research paper on these devices on a scientific conference
in Australia, in spite that this paper went through referees and
was accepted for the conference. According to the opinion of
my superiors, the paper supposedly run against established
canons of the present science (referees which reviewed my paper
on the behalf of organisers of this conference did not think so).
Also soon after I finished purchases of components for my free
energy devices and was just about to start their physical
construction, the university fired me from the lecturing job,
thus making impossible to carry out any further research and
development on these wonder devices. The paper that I was disallowed
to present, was later converted into a scientific treatise.
Now it constitutes a major part of monograph
[6]
on free energy
available through this web page. In turn the strange coincidence
in timing of my dismissal from the lecturing job on this university,
and my invention of the telekinetic cell, implanted an idea into my
mind, that perhaps there is a
dark force
on this planet, which tries to prevent our civilisation
from constructing these wonder devices and from
mastering free energy. My later research confirmed
this idea, proving that practically all outstanding
inventors and all breakthrough inventions are
persecuted by a mysterious "curse of inventors"
described in a larger number of details on a
separate web page about
telekinetic cells.
This dark force either assassinates developers
of free energy devices, as it probably did to the
Austrian, Bela Brosan (i.e. the builder of first
telekinetic influenzmaschines), or it locks
operational such devices in power of some
impenetrable communities, as it probably did
with two "Testatica" and with one "Thesta-DIstatica"
influenzmaschines, or it continually persecutes
researchers who investigate free energy devices,
as it for sure is doing to me since the time of
inventing these devices (for more details on this
dark force, see subsection A3 from the volume
1 of monograph
[1/4]).
It is worth to know about the existence of this
dark force, because every developer who
attempts the construction of free energy devices
and is close to a success, always encounters
numerous obstacles that this
dark force
places on his or her path.
#3.5.
How to build a telekinetic influenzmaschine:
The simplest manner of
building a telekinetic influenzmaschine is to start from
constructing an AC motor working on principles of
electrostatic influence. Such a motor needs
to be simply a reversal of either the Töpler machine, or
the Wimshurst electrostatic machine. Actually such a motor
can be purchased almost ready made, as many countries,
including Poland, offer brand new Winshurst electrostatic
machines for sale in shops. These ready-made
machines look as it is shown in "Fig. #3c" above (or 11 in [6/2]).
The problem is, however, that the Töpler and the Wimshurst machines
both work as electrostatic generators. Namely they produce
static electricity while consuming mechanical motion.
To convert them into influence motors, it is necessary
to reverse their principles of operation. So they must
be able to produce motion when their capacitors are
supplied with AC electricity. After we have such an electrostatic
motor working, we need to use one electrode from it as a pulser.
Means we catch the electric impulses that this motor
generates, with the brush marked "ho" on illustrations
"Fig. #3a" and "Fig. #3b" above (or K5 and K6 in [1/4]).
Then we feed these impulses into a separate telekinetic cell
that we attach to our motor. These impulses are going to
make our telekinetic cell work. So we can feed now the output
from this telekinetic cell back into the capacitors of our motor.
In this way we receive a duplex operation of the resultant
device, composed of the electrostatic motor, and the
telekinetic cell. In this duplex operation the motor
produces electric impulses which sustain the operation
of the telekinetic cell, in turn the telekinetic cell
generates electricity which sustains the operation of
the motor. So the resultant device is going to operate
exactly the same as does the Thesta Distatica shown previously
in "Fig. #1" (or K4 in [1/4]). (This practically means that
the description that I am providing here is also a description
of the true operation of the Thesta Distatica constructed
by the Swiss religious community "Methernitha".)
Our device is to produce mechanical motion, plus plenty of
free electricity, the excess of which can be utilised by
us for supplying other electrical appliances.
#3.6.
I would be able to build a free energy device for you:
I should emphasize here, that I have all the
knowledge and all the skills needed to construct
free energy devices. Unfortunately, in my
own case extremely strange turns of fate
continually take place. Attributes of this
strange fate suggest, that I am affected
by events that are purposely "arranged"
for me by this persisting dark force that
I mentioned before, and that I describe
on a separate web page about the
telekinetic cell.
In the result of these strange events, I am continually put
into difficult personal, health, living, and professional situations.
These situations seem to always be so programmed, that they
deprive me conditions and chances for undertaking any laboratory
experimentations or practical construction efforts on free energy devices.
For example, I am either unemployed, or the situation forces
me to seek a next job, or I have a relatively steady job but
it is in a professional specialisation or in an institution
that does not allow for any practical experiments nor for
any practical creative searches outside of the discipline
in which I am earning for my living. (After all, in present
scientific atmosphere, from definition the area in which
I am able to earn for my living, cannot include research
on free energy devices.) Also my financial, personal,
housing, and health situations continually seem to be
maintained in the state that does not allow me for carrying out
any advanced private experimentations or construction works.
Therefore, if you (the reader) have suitable conditions
and finances for the developmental research on free
energy devices, or could be able to arrange for them,
I would be more than willing to initiate a cooperation
with you towards constructing these wonder devices.
In such a case I would count on you in finding a way of
securing for me necessary conditions for the research
and development of these devices, means securing an
access to measuring equipment, to manufacturing of
new prototypes of the researched device, and to a
reasonably supplied scientific library, as well as a
space in a research laboratory where I could carry out
my experiments. After all, free energy devices are urgently
needed by our civilisation, and one day they may even
save humanity from a danger of extinction.
#4.
The telekinetic heater:
The Telekinetic Effect can also be utilised
to generate various other forms of "free energy" than just electricity.
There are devices already build and tested in action, which utilise the
reversal of friction capabilities of this effect for converting environmental
thermal energy into energies other than electricity. For example, they
produce chemical energy by converting environmental heat into products
of dissociation of water to hydrogen and oxygen. They also produce biological
energy by carrying out technical healing. Finally there are also free
energy devices which produce heat. This last application of the Telekinetic
Effect allows to construct telekinetic heaters, which have the efficiency
exceeding significantly 100%. On this web page I am going to describe one such a
telekinetic heater, which was already constructed and proven in action,
and which is believed to have the energy efficiency reaching 2000%. This
means that if properly constructed and tuned, it consumes the amount of
electrical energy that represents only around 5% of the total energy
that it produces in the form of heat. The inventor of this revolutionary
free energy device is Peter Daysh DAVEY of Christchurch, New Zealand.
The design of the Davey's telekinetic heater
is extremely simple. It actually is composed
of two major parts only – see "Fig. #4a" (or
K8 (3) from monograph
[1/4]).
The most important out of these two parts is a resonating
hemispherical bowl (1) made of a sound inducing metal plate. The second part is
a buffering hemispherical bowl (2) almost identical in shape to the bowl (1).
This second bawl has the radius around 4 mm larger than the resonating hemispherical
bowl (1). Both bowls are assembled symmetrically one around the other, means
the hemispherical bowl (1) is placed inside of the hemispherical bowl (2). Of
course, apart from these two bowls, the heater also includes a long pipe (8)
which holds remaining parts together, two nuts (5) and (3) which fix both
bowls in their proper locations, a washer (4) which allows to regulate the
mutual distance "L" between both bowls, and electrical wires (6) and (7)
which supply electricity to both bowls and allow the heater to be submerged
into water that it heats. But these other parts are marginal additions only.
The major parts are the bowls. During experimental production of this heater,
the resonating hemispherical bowl (1) usually is made from an old cover for
a bicycle bell. The dimensions of this hemispherical bowl are not important.
It is only vital that it falls into a sonic resonance at the frequency of 50
Hertz, and that it has the outer surface which is parallel and equidistant
from the external buffering hemispherical bowl (2). To each of these two bowls
a different wire of the household electricity supply (i.e. 220 V, 50 Hz)
is connected. The heater must be submerged in water that it heat. It brings
water to the boiling point extremely fast. More details about the design
and operation of this telekinetic heater is provided in subsection K3.3
from volume 10 of monograph [1/4].
Fig. #4a: The above drawing illustrates the general
design and main components of the telekinetic heater
of Mr Davey. Notice that it can easily be enlarged
by clicking onto it.
Descriptions of subsequent components of this heater
are provided in subsection K3.3 from volume 10 of
monograph [1/4].
(The above illustration originates from monograph
[1/4]
where it is shown as part (3) on Figure K8 - courtesy "szod".)
After being constructed, the Davey's telekinetic
heater must be "tuned" in two different manners. The first tuning depends on
providing the hemispherical bowl (1) with such frequency of the own oscillations,
that makes this bowl to resonate acoustically when a sound of the frequency 50 Hertz
is emitted nearby. The second tuning of the heater depends on appropriate selecting
the distance "L" between both bowls (1) and (2). On this distance depends the
formation of the standing wave between both bowls. Thus it decides about the
energy efficiency of the entire heater.
The principle of operation of this telekinetic
heater is quite similar to the principle of operation of the telekinetic battery
explained before. Namely the Telekinetic Effect is released in it due to the
acceleration and deceleration of magnetic field. The magnetic field that is
accelerated, is the one that is generated by the electric current which flows
through water between both bowls. In turn the acceleration of this field is
accomplish through sonic vibrations of the inner bowl. The required asymmetry
of the vibrations of the field, which is required to generate the Telekinetic
Effect, and which in the telekinetic battery is caused by permanent magnets inside
of coils, in this heater is provided by the curvature of the bowls. Thus the
inner hemispherical bowl in this heater is doing the same job as the inductor
(I1) is doing in the telekinetic cell.
#4.1.
The energy efficiency of this heater:
The unusual attribute of the Davey's telekinetic heater is
that it was experimentally proved to telekinetically shift to the heated water
many times more thermal energy than the amount of electrical energy it consumes.
I myself did not research the energy efficiency of this heater. However, from
the information that the inventor repeated to me, I gather that the measurements
carried out by New Zealand scientists suggested that this heater may consume
even less than the equivalent for around 5% of the energy that it generates in
form of heat. This would indicate, that the electrical efficiency of this heater
is around 2000%. (Means, that the heater produces over 20 times more heat than
it consumes electrical energy.) In turn so huge efficiency of this heater allows
it to be used for constructing the so-called "perpetum mobile" (means to e.g.
evaporate water with this heater, use the steam that it produces to run a steam
engine, while the motion from the steam engine use to generate electricity which
is going to supply the heater with the energy required to evaporate water, etc.,
etc.) Several orthodox scientific institutions in New
Zealand had a very hard time to explain on the basis of today physics what is
the reason for this over 100% efficiency of this device. After all, it contradicts
all known laws of thermodynamics. Finally one of these institutions (i.e. the
New Zealand DSIR) got an idea, or rather an accusation, that this heater instead
of the electric current may consume the so-called "cosine fi" - i.e. the abstract
quantity that represents a phase shift between the pulsations of the voltage and
pulsations of the amperage in the alternating current. This particular parameter
is immeasurable with the standard electrical instruments. But even the specialized
measurements and research carried out by these scientists have not confirmed this
claim (accusation). Still, in spite that it was never confirmed experimentally that
this heater actually consumes the "cosine fi", due to insisting on this deceitful
explanation, the authority of the orthodox science was saved.
#4.2.
Potentials for causing a scientific revolution:
The Davey's telekinetic heater hides potentials
for causing a real revolution in the Earth's science and technology. The reason
is that it works on principles of technically induced telekinesis, that the
efficiency of it cannot be explained by orthodox science to-date, and also that it
allows to accomplish things that so-far were considered to be "impossible" -
e.g. it allows to construct "perpetum mobile". This means that a
popular use of this heater would inspire new areas of research and new quest
for answers. Therefore, should this
extraordinary heater be put into mass production at the time when the inventor
intended it, means in 1945, by now it would completely turn upside down the human
science and technology. So the technically induced telekinesis, instead of being
explained by myself only in 1989, would actually be explained by some other
scientist at least 40 years earlier. In turn the explanation of principles
of technical telekinesis, would lead to the development of telekinetic propulsion
systems, of the type used in the Magnocraft described on my web pages
telekinesis.50megs.com and
jan-pajak.com.
It would also inspire our understanding of human telekinesis (psycho-kinesis)
and attributes of the human mind which induce human version of telekinetic
motion.
Fig. #4b: The telekinetic immersion heater invented
during the World War Two (in 1944) by the New Zealand
fighter pilot and musician named Peter Daysh Davey.
The main component which releases the Telekinetic
Effect in this heater, is the inner resonance bowl visible
on the very right side, as it sticks out from the outer
buffering bowl. (The old New Zealand 50 cents coin,
visible on this photo, is 32 mm in diameter. In August
2006 these coins were withdrawn from circulation.)
This mechanically simple device generates many times
more heat, than the amount of electrical energy that
it consumes. Thus it has the energy efficiency of
significantly exceeding 100%. It is probably one of
the most simple free energy devices in existence.
It was proven in action and subjected to measurements
by numerous scientists. However, the mass production
of it was purposely blocked by the means of bureaucratic
obstacles - for details see the "curse of inventors"
described on the web page about
telekinetic cells.
(The above photograph originates from monograph
[1/4]
where it is shown on Figure K8.)
#4.3.
Persecution of the inventor:
The story of the invention of this heater is
both, very inspiring, and also very sad. Mr Davey was a musician who volunteered
to defend freedom and his country as a fighter pilot during the World War Two. He
took part in the Battle for Britain. Fighter aeroplanes of that time had propellers
and engines, which during acrobatics of aerial battles were making the pilots cabin
to vibrate at various frequencies. As a sensitive musician Mr Davey noticed, that
there was such a frequency of the motor and propeller buzzing, when the aeroplane
cabin and his body were getting into a resonance. At this unique resonance frequency he
always was experiencing an influx of heat in his aeroplane cabin. He did not
know yet, that in future this phenomenon will be utilised in ultrasonic weapon
systems for effective and undetected killing of people. But he decided to test
whether the same phenomenon is to appear, if a metal hemisphere which simulates
his pilot cabin is submerged in water and is excited into a resonance frequency
of an AC current. So he found two tops from old
bicycle bells, joined them together, tuned one of them to 50 Hz frequency, attached
electricity wire to each one of them, and thrown them into water. Surprisingly,
water started to boil extremely fast. So he made his first heater patent
based on this observation. This patent was already registered in 1944.
After a hero return from the war, he had a
device, which repetitively proved to everyone who measured it, that it has the
efficiency decisively exceeding 100%. Realising this, he believed that the world is
going to pounce on the opportunity of production and use of this technical miracle.
After all, people are full of declarations about apparent saving on energy, resources,
about protection of our natural environment, etc. However, the reality turned out
to be completely opposite. Immediately after it was experimentally confirmed that
the device has unexplainably high efficiency, the heater and the inventor fell
into disfavour of various institutions that are interested in selling electricity
and that protect the monopoly on electrical power. In the result, this extraordinary
invention received an extraordinary treatment! Namely authorities were doing everything
in their powers to disallow the production and sale of this heater in New Zealand.
One of legal tricks that were used against this heater, was that it was declared
officially to be "unsafe to health and life of users". (Please notice that practically
every electrical device working on 220 Volts can be declared unsafe, if someone in
the position of authority wishes to put it down.) In turn in New Zealand it is
impossible to undertake the production and sale of anything, that is not officially
approved by the government. In the result, Mr Davey was fighting for almost 50 years
to receive a permit for the industrial production of this heater. And during these almost
50 years, the permission was continually refused to him, no matter what research
outcomes he submitted to please authorities, and no matter how hard he tried.
But it is interesting, that in Australia an electric jug with a heating element
of the design very similar to the Davey’s heater was put in mass production (this
Australian jug most probably is produced in there still even today). This Australian
jug is working on the principle of electrical resistance of water (i.e. not telekinesis
as the heater of Mr Davey does). Water that it heats is a resistor, in which heat
is generated because of the electric current flows through this water.
This Australian jug is exactly the same "dangerous to the health and lives", like
the telekinetic heater of Mr Davey. Only that it did not encountered in Australia
similar bureaucratic resistance because the energy efficiency of it is "normal".
When I met Mr Davey for the first time in 1990,
he still was appealing to authorities, and still had a hope to receive a permit
for the production of his heater - in spite of these almost 50 years of lost battles
with bureaucrats. He was even showing to me a large stock of components he
gathered to start a production immediately after the permit is granted to him.
However, he gave up the experimental production of research copies of his heater.
Even the heater he was using by himself, was then already broken and he had no
the will to repair it (this broken heater is shown
on the photo "Fig. #4b" above). So practically
I had no pleasure of seeing his heater at work.
However, he run out of his usual optimism when I talked to him for the last time shortly
before I needed to leave New Zealand in 1992 to seek my bread overseas.
Then he was completely destroyed, deprived the will to live, and on the edge of
a nervous breakdown. His most recent appeals were again squashed. He could not
understand then, why offering to the world a breakthrough free energy device of the
experimentally proven efficiency that well exceeds 100%, he receives back only
scoffing, persecution, and bureaucratic plus legal obstacles that make impossible
the production of this miraculous device. In 1998 I returned to New Zealand from
my bread-seeking globetrotting. Of course, each time I managed to visit Christchurch
I attempted to also contact Mr Davey. But in the place where his home stood previously,
I found only a large pile of broken wooden planks mixed with broken bricks. It
looked as if several heavy tanks rolled through his home. In turn no even a trace
of him. I also was unable to locate anyone, who would know what actually happened
to him. In turn after 1999, as I explained this in subsection A4 of monograph [1/4],
it has not been in my fate to let me go to Christchurch again. By now the Davey's
telekinetic heater is completely forgotten in New Zealand. It was no any help to
it, that the energy efficiency of this heater was proven at the miraculous level
of many times above 100%. In turn the fate of the inventor himself remains unknown
to me – if anyone out there is aware what happened to him, please let me know. When
I talked to Mr Davey the last time, I promised him to publish the description of his
heater and the story of his lifetime battles, so that perhaps someone else picks up
his fight and puts this miraculous heater into mass production. In this way his almost
50 years of suffering and his brilliant invention would not be wasted, and would start
to work for the good of our civilisation. This web page is my fulfilment of that
old promise.
#5.
Where this immoral persecution comes from:
It is not difficult to notice, that whenever
a new free energy device is invented and
build on Earth, immediately some sort of an
"evil power"
is unleashed, which squashes either this
device or the inventor. Only on this web
page three immensely important inventions
suppressed by this evil dark force are
described. Further similar cases are described
on the web pages
a.1asphost.com/Tapanui and
totalizm.pl,
as well as in subsection A4 from volume 1 of monograph [1/4].
The action of this squashing force is a rule - no matter in
which country a given invention is accomplished. Someone persistently
disallow our civilisation to benefit from free energy. There are too
many cases like this, taking place in too many countries, to be just a coincident.
Personally I am explaining this oppression of free energy inventions by
the theory of an invisible occupation of Earth by evil parasitic creatures,
which are extremely advanced technically to the point that they make
themselves completely invisible to human eyes. But simultaneously they
are at the very bottom of moral decadency, thus they live from robbery of
other civilisations. These parasitic creatures exert an invisible control
over everything that happens on Earth. Their evil activities include,
amongst others, the suppression of all inventions on free energy,
propulsion systems, flying vehicles, etc., and persecuting inventors who
accomplished these inventions. The reason is that these inventions and
inventors help to lift Earth's technology to the level that
we may be able to see these normally invisible evil creatures. I am
describing these parasitic creatures in more details on web pages
UFOnauci.w.interia.pl or
UFOnauts.20m.com.
But even if one does not share my views, still by just looking at the
sheer volume of free energy inventions that are strangely being hold
back, suppressed, or destroyed, one must admit that something really
weird is going on, and that something or someone is intentionally
suppressing the development of free energy devices on Earth.
#5.1.
Our fate follows the way we treat inventors:
Whatever we have and accomplished as a civilisation
and country, we actually own this to our inventors. Also whatever we have in our
homes and at work, that makes our lives comfortable, easy, and civilised,
we also own this to them. Furthermore, there seems to be a unique
moral law
operating in the universe with the iron hand, which promotes inventions by
rewarding countries which facilitate their technical development, and simultaneously
punishing countries which oppress their inventors. This moral law causes,
that the fate of all citizens of a given nation always follows the way these
citizens treat their inventors. For this reason, each invention that is
squashed or hold back, is actually disadvantaging every single one of us,
as well as our children, grandchildren, etc.
Creative inventors can be compared to geese
that lie golden eggs. The logic tells us, that if someone has a goose that lies
golden eggs, such someone should nourish it, take a good care of it, encourage
it to lie more eggs, and help it in the difficult burden of actual laying these eggs.
However, the reality seems to be, that usually such someone chases this goose with
a big stick. When, in spite of constantly being chased, the goose still manages to
lie a golden egg, frequently it is being cooked for punishment.
#5.2.
I am available for assisting in research and development of free energy devices:
Recently I was made redundant from my lecturing job in computer sciences.
The reason was a mysterious slump in numbers of students
who study computing and Information Technology in New Zealand.
The loss of income is always a regrettable situation. However,
in my circumstances it also opens a possibility of finding another
job, which would be more suitable for research and development
of extraordinary devices described on this web page. I am presently seeking just
such a job. Please let me know if you hear of any suitable position.
I am interested in every position, which would allow me to research
and to develop working prototypes of any devices described on my web
pages. This includes the device described on this web page, as well as the
Oscillatory Chamber, or the
Zhang Heng's remote detector of impending earthquakes for our homes, hand-phones, and satellites.
The most ideal position, which would suit me best, would be the one
described on a separate web page
my job search.
However, I understand that it is very difficult to accomplish an
ideal in life. Thus I am prepared to negotiate any job opportunity
which would allow for experimental research of such innovative devices.
#5.3.
I recommend to print this web page, or save it in your computer!
You are very lucky if you managed to open this web page.
It is strongly sabotaged by the same dark force, which persistently persecutes
inventors of free energy devices, and which stubbornly prevents the dissemination of
already existing free energy devices. This dark force causes, that opening any of my web
pages on free energy, is always hindered by some strange "coincidences". Therefore,
if you were so lucky that you actually managed to open and read what I am writing here,
and you intend to test your skills by actual constructing one of these devices,
I would strongly recommend that you either print this web page, or you save it on your
hard disk. The reason is, that a next time you may not be so lucky, and this page
may not be available when you wish to look at it again. So if you have it printed,
or stored on your hard disk, you can return to it any time, even when all the internet
versions of it are already sabotaged by this evil force.
Should you wish to copy this web page onto your
hard disk, to be able to read it later at your leisure
time, the procedure is very simple. You just need
to follows the steps described in item #7 at the end
of this web page.
-German
-French
-Spanish
-Italian![Fig. #1: Thesta-Distatica (Fig. K4 from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_k04_2.jpg)
![Fig. #2a: Telepathic pyramid (Fig. N1(high) from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_n01h.jpg)
![Fig. #2b: Components of the Telepathic Pyramid (Fig. N1(low) from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_n01l.jpg)
![Fig. #2c: Design of the Telepathic Pyramid (Fig. N2 from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_n02.gif)
![Fig. #2d: Electrical diagram of the Telepathic Pyramid (Fig. N3 from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_n03.gif)
![Fig. #3a: Components of the influenzmaschine (Fig. K5 from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_k05b.gif)
![Fig. #3b: Electrical wiring of the influenzmaschine (Fig. K6 from [1/4]). Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_k06.gif)
![Fig. #3c: The Winshurst electrostatic machine. Notice, that because of the crude sabotages described on web pages ufonauts.20m.com and ufonauci.w.interia.pl, most vital illustrations can be blocked from appearing on this page. Then seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](jp/me_and_wimshurst.jpg)
![Fig. #4a: Components of the telekinetic heater of Mr Davey (Fig. K8 (3) from [1/4]). Notice, that because of reasons explained on web pages ufonauts.20m.com and ufonauci.w.interia.pl, sometimes vital illustrations can be blocked from appearing on web pages. When this happens, seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_k08_3.gif)
![Fig. #4b: The telekinetic heater of Mr Davey (Fig. K8 from [1/4]). Notice, that because of reasons explained on web pages ufonauts.20m.com and ufonauci.w.interia.pl, sometimes vital illustrations can be blocked from appearing on web pages. When this happens, seek them on other pages from the Menu (e.g. on free energy, or with text of [1/4]).](14/14_k08.jpg)
